IS 383 — Specification for Coarse and Fine Aggregates From Natural Sources For Concrete
IS 383 (1970) specifies the requirements for coarse and fine aggregates obtained from natural sources for use in concrete. It defines quality parameters such as grading, particle shape, deleterious materials limits, mechanical properties, and soundness to ensure aggregates contribute to durable and strong concrete. This standard is essential for engineers, contractors, and suppliers involved in concrete mix design and construction to select and verify aggregates that meet performance and durability criteria.
9الأقسام
112البنود المفهرسة
✓جاهز بحث AI
1970الطبعة
Cement Concrete Aggregates and RCCالفئة
مصطلحات بحث بديلة: IS 383 PDF, IS 383 pdf free download, IS 383 free download pdf, IS383 PDF, IS-383 PDF, IS 383 1970 PDF, IS 383:1970 PDF, IS 383-1970 PDF, IS 383 (1970) PDF, IS 383 1970 edition PDF, IS 383 edition 1970 PDF
نظرة عامة
ما يغطيه هذا المعيار
IS 383 (1970) specifies the requirements for coarse and fine aggregates obtained from natural sources for use in concrete. It defines quality parameters such as grading, particle shape, deleterious materials limits, mechanical properties, and soundness to ensure aggregates contribute to durable and strong concrete. This standard is essential for engineers, contractors, and suppliers involved in concrete mix design and construction to select and verify aggregates that meet performance and durability criteria.
الجمهور
من يستخدم هذا المعيار
Civil Engineers
Structural Engineers
Concrete Technologists
Construction Contractors
Quality Control Inspectors
Aggregate Suppliers
Materials Testing Laboratories
المحتويات
المواضيع الرئيسية المغطاة
✓Quality requirements for natural aggregates
✓Limits on deleterious materials in aggregates
✓Grading and size specifications for coarse and fine aggregates
✓Mechanical properties including crushing and impact values
✓Aggregate abrasion value limits
✓Soundness testing for frost resistance
✓Sampling and testing procedures
✓Particle shape and surface texture considerations
✓Handling of alkali-reactive aggregates
✓Agreement between purchaser and supplier on special requirements
✓Use of IS sieves and perforated plates for size determination
✓Documentation and certification requirements
الهيكل
جدول المحتويات
1Scope▼
Detailed content not available.
2Definitions and Terminology▼
Detailed content not available.
3Quality of Aggregates▼
Detailed content not available.
4Size and Grading of Aggregates▼
Detailed content not available.
5Sampling and Testing▼
Detailed content not available.
6Supplier and Purchaser Responsibilities▼
Detailed content not available.
7Additional Requirements and Agreements▼
Detailed content not available.
Appendix ATechnical Information to be Supplied by Supplier▼
Detailed content not available.
Appendix BList of Referenced Standards▼
Detailed content not available.
الأسئلة المتكررة
الأسئلة الشائعة حول IS 383
?What are the maximum allowable limits for deleterious materials in aggregates according to IS 383?▼
Detailed answer not available.
?How does IS 383 specify the grading and nominal sizes for coarse and fine aggregates?▼
Detailed answer not available.
?What mechanical property tests are required for aggregates under this standard?▼
Detailed answer not available.
?How should aggregates be tested for soundness and resistance to frost action?▼
Detailed answer not available.
?What documentation must suppliers provide to certify compliance with IS 383?▼
Detailed answer not available.
✦
هل تحتاج إلى إجابات تفصيلية للبند؟
اسأل AI عن أي بند، متطلب، أو حكم في IS 383. احصل على ردود فورية مع الاستشهاد بالبند مدعومة بمكتبتنا المفهرسة.